On-Chip Primary/Secondary Ide [Enabled]; Ide Primary/Secondary Master/Slave Pio [Auto]; Sata Mode [Ide]; On-Chip Serial Ata [Auto] - IEI Technology IMBA-8650 User Manual
Atx motherboard, intel pentium 4 processor with vga, dual sata, eight usb 2.0, sixcom, agp, five pci, two isa, gigabit ethernet and compactflash
Hide thumbs
Also See for IMBA-8650:
- User manual (239 pages) ,
- Quick installation manual (9 pages) ,
- Quick installation manual (4 pages)
Table of Contents
Advertisement
IMBA-8650 Motherboard
On-Chip Primary/Secondary IDE [Enabled]
The On-Chip Primary/Secondary IDE option enables or disables the IDE controller on
the system chipset.
Enabled
Disabled
IDE Primary/Secondary Master/Slave PIO [Auto]
The IDE Primary/Secondary Master/Slave PIO option configures which Programmed I/O
mode to use if Programmed I/O is in use.
Auto
Mode 0
Mode 1
Mode 2
Mode 3
Mode 4
SATA Mode [IDE]
The SATA Mode option selects the mode of the onboard SATA. This setting cannot be
changed.
IDE
On-Chip Serial ATA [Auto]
The On-Chip Serial ATA option configures the serial ATA settings for the onboard SATA
controller.
(Default)
The IDE channel is enabled
The IDE channel is disabled
(Default)
The fastest PIO speed is automatically chosen
Maximum transfer speed of 3.3MB/s
Maximum transfer speed of 5.2MB/s
Maximum transfer speed of 8.3MB/s
Maximum transfer speed of 11.1MB/s
Maximum transfer speed of 16.7MB/s
(Default)
The operating system does not load SATA ACHI
functions and uses the native IDE driver.
Page 141
Advertisement
Chapters
Table of Contents
