IMBA-8650 Motherboard
The IMBA-8650 Super I/O Enhanced Hardware Monitor also monitors the following fan
speeds:
Fan1 speed
Fan2 speed
The values for the above environmental parameters are all recorded in the BIOS
Hardware Health Configuration menu.
2.9.2 Operating Temperature and Temperature Control
The maximum and minimum operating temperatures for the IMBA-8650 are listed below.
Minimum Operating Temperature: 0ºC (32°F)
Maximum Operating Temperature: 60°C (140°F)
A cooling fan and heat sink must be installed on the CPU. Thermal paste must be
smeared on the lower side of the heat sink before it is mounted on the CPU. Heat sinks
are also mounted on the Northbridge and Southbridge chipsets to ensure the operating
temperature of these chips remain low.
2.9.3 Power Consumption
Table 2-2 shows the power consumption parameters for the IMBA-8650 running with an
®
Intel
Pentium® 4 3.0GHz processor and 1GB of DDR 400MHz memory.
Voltage
Current
+3.3V
0.7A
5VSB
0.7A
+5V
4.9A
+12V
7.3A
-12V
0.2A
Table 2-2: Power Consumption
Page 39