Advertisement
Quick Links
ATX Form Factor with Intel® Core 2 Duo, Pentium®
D/Pentium® 4/Celeron® D CPU FSB 533/800/1066MHz,
Dual VGA, PCIe GbE, USB2.0, SATA and Audio
Quick Installation Guide
Package Contents
IMBA-9454B package includes the following items:
l
1 x IMBA-9454B single board computer
l
2 x Quad ports RS-232 cable
l
4 x SATA cable
l
1 x ATA66 IDE Flat cable
l
1 x I/O shielding
l
1 x Mini Jumper Pack
l
1 x Utility CD
l
1 x QIG (Quick Installation Guide)
IMBA-9454B-R11
May. 30, 2011
©2011 Copyright by IEI Technology corp.
All rights reserved.
Version 1.0
1
Advertisement
Related Manuals for IEI Technology IMBA-9454B-R11
Summary of Contents for IEI Technology IMBA-9454B-R11
-
Page 1: Quick Installation Guide
2 x Quad ports RS-232 cable 4 x SATA cable 1 x ATA66 IDE Flat cable 1 x I/O shielding 1 x Mini Jumper Pack 1 x Utility CD 1 x QIG (Quick Installation Guide) ©2011 Copyright by IEI Technology corp. All rights reserved. -
Page 2: Specifications
Specifications LGA 775 Intel® Core 2 Duo, Pentium® 4/ Celeron® D processor, FSB 533/800/1066MHz System Chipset Intel® 945G + ICH7 BIOS AMI BIOS System Memory 2 x 240-pin Dual-Channel DDR2 400/533/667MHz up to 4GB Ethernet Realtek PCIe RTL 8111CP GbE Controller I/O Interface: 6 x USB 2.0(4 on rear, 2 by pin-header) 4 x SATA II... -
Page 3: Ordering Information
Temperature Operation 0°C ~ 60°C (32°F ~ 140°F) Humidity Operation: 5% ~ 95% non-condensing Dimension 190mm x 304mm Weight GW: 1200g/NW: 650 g Ordering Information IMBA-9454B-R10: ATX Form Factor with Intel® Core 2 Duo, Pentium® D/Pentium® 4/Celeron® D CPU FSB 533/800/1066MHz, Dual VGA, PCIe GbE, USB2.0, SATA and Audio. -
Page 4: Jumpers Setting
Jumpers Setting LABEL FUNCTION CLR_CMOS1 CMOS state setting AT & ATX Power Mode Setting Set the function of pin9 as signal or voltage J_COM_F1~J_COM_F4 (+12V/+5V Voltage Select by J_COM_V1~J_ COM_V4) J_COM_V1~J_COM_V4 Set the voltage level of pin9 at COM1 ~ COM4 CLR_CMOS1 : Clear CMOS Setup(P=2.54mm) CLR_CMOS1 DESCRIPTION... - Page 5 Table of Connectors LABEL FUNCTION KBMS1 PS/2 MOUSE & KEYBOARD Connectors LPT1 Parallel Port Connector VGA1 VGA 15-pin Female Connector (from Intel® 945G) VGA2 VGA 15-pin Female Connector (from Chrontel CH7021A) USB1 External Dual Ports USB Connectors RJ-45 LAN Connector, and External Dual Ports USB LAN/USB1 Connectors Extend Audio Connector...
- Page 6 LINE_OUT1 : Internal audio line -out (P=2.54mm) DESCRIPTION LINEOUT-L AGND AGND LINEOUT-R PWR1: System Main Power input Connector DESCRIPTION DESCRIPTION 3.3V 3.3V 3.3V -12V PS_ON Power Good 5VSB +12V +12V 3.3V CPU_FAN1:CPU Fan Connector DESCRIPTION +12V Sensor Speed control SYS_FAN1 : System FAN Connector. DESCRIPTION +12V(FAN PWM2) Speed Sensor...
- Page 7 FDC1: Floppy Connector DESCRIPTION DESCRIPTION REDWC- INDEX- MOTEA- DRVSA- DIR-- STEP- WDATA - WGATE- TRK0- WPT- RDATA - SIDE1- DSKCHG- CN2: PWR & RST Buttons & Speaker and Indicators (P=2.54mm) DESCRIPTION DESCRIPTION Power LED+ (5V) Speaker+ Power LED- Power Button- Speaker- Power Button+...
- Page 8 JSPI1=SPI flash connector(P=2.54mm) DESCRIPTION DESCRIPTION SPI_VCC(+3.3V) SPICS- SPICLK SPIMISO SPIMOSI USB2 : Internal 2 Port USB Connectors DESCRIPTION DESCRIPTION USB PWR USBP4- USBP5+ USBP4+ USBP5- USB PWR IDE1 (Blue): IDE Interface Connector DESCRIPTION DESCRIPTION RESET# DATA 7 DATA 8 DATA 6 DATA 9 DATA 5 DATA 10...
- Page 9 MINI-PCIE1: PCI-E Mini Card connector DESCRIPTION DESCRIPTION WAKE- +3.3V +1.5V PCIE_CLK- PCIE_CLK+ W_DISABLE# PERST# PERN +3.3V AUX1 PERP +1.5V SMB_CLK PETN SMB_DATA PETP USB_DATA - USB_DATA+ +1.5V +3.3V...
- Page 10 COM1-4 : Internal Serial Port Connectors DESCRIPTION DESCRIPTION DCD1 # DSR1 # RXD1 RTS1 # TXD1 CTS1 # DTR1 # RI1 # DCD2 # DSR2 # RXD2 RTS2 # TXD2 CTS2 # DTR2 # RI2 # DCD3 # DSR3 # RXD3 RTS3 # TXD3...
- Page 11 COM5-8 : Internal Serial Port Connectors DESCRIPTION DESCRIPTION DCD5 # DSR5 # RXD5 RTS5 # TXD5 CTS5 # DTR5 # RI5 # DCD6 # DSR6 # RXD6 RTS6 # TXD6 CTS6 # DTR6 # RI6 # DCD7 # DSR7 # RXD7 RTS7 # TXD7...
- Page 12 Board Layout: (Unit:mm)