IMBA-8650 Motherboard
PnP/PCI Configurations: Changes the advanced PCI/PnP settings.
PC Health Status: Monitors essential system parameters.
Frequency/Voltage Control: Changes voltage and frequency parameters.
The following user configurable options are also available in BIOS Menu 1:
Load Fail-Safe Defaults
Use the Load Fail-Safe Defaults option to load failsafe default values for each BIOS
parameter in the setup menus. Press F6 for this operation on any page.
Load Optimized Defaults
Use the Load Optimized Defaults option to load optimal default values for each BIOS
parameter in the setup menus. Press F7 for this operation on any page.
Set Password
Use the Set Password option to set the password. By default, no password is set. To
install a password, select this field and enter the password. After this option is selected, a
red dialogue box appears with "Enter Password: ". Type the password and press E
Retype the original password into the "Confirm Password: " dialogue box and press
E
. To disable the password, simply press E
NTER
box, then press any key in the "Password Disabled !!!" dialogue box.
Save & Exit Setup
Use the Save & Exit Setup option to save any configuration changes made and exit the
BIOS menus.
Exit Without Saving
Use the Exit Without Saving option to exit the BIOS menus without saving any
configuration changes.
in the "Enter Password: " dialogue
NTER
.
NTER
Page 121