SiK401004_A
2.3 Cautions for Installation
The installation of the outdoor unit shall guarantee that the discharged air will return
Installation site shall be well ventilated so that the unit can intake and discharge
If the unit is installed on the solid surface, fix the unit with M10 bolts and nuts and make
Lift the outdoor unit with indicated holes for hoist. Protect the unit from corrosion when
Rubber vibration pad and rubber junction shall be applied to meet the requirements of
If drain pipe shall be installed, insert the joints of drainage into outlet in base plate of
Wall bushing shall be installed when pipe goes through the wall.
Installation dimensions shall comply with the instruction manual. And the outdoor unit
Installation of the unit shall be executed by professionals.
INSTALLATION
and enough service space shall be reserved around the unit.
adequate air. Make sure that there is no obstruction for air inlet and out let. If there is,
please remove such obstructions.
sure the verticality and horizontality of the unit.
lifting, in case it will rust.
noise and vibration
the outdoor unit. And then connect the joints with an drain pipe.
shall be fixed to the base or support.
70
Need help?
Do you have a question about the RY24PEV1K and is the answer not in the manual?