Daikin RY24PEV1K Service Manual page 50

SiK401004_A
3.3.2 Project Debugging
Enquiry of wired controller's address: Press Function and Mode buttons at the same time
Setting of wired controller's address: Press Function and Mode buttons at the same time
Addresses of the wired controller are used for centralized control of wired controller.
Enquiry and setting of wired controller's address is shown as Fig.3.3.2 below:
FUNCTION CONTROL
Fig.3.3.2: Enquiry and Setting of Wired Controller's Address
for 5s under off-state of the unit, and then LCD
displays wired controller's address number.
for 5s.In this case, LCD displays address number.
Then press ▲ or ▼ button to adjust address
(address no.:1-16) .After that, press Enter/Cancel
button to confirm.
42