Daikin RY24PEV1K Service Manual page 58

SiK401004_A
Note:
1. In Auto running mode with save function on, the unit will be forcibly changed to
2. In save mode, if Function button is pressed or there is not any operation within 5s after
3. After power failure and then recovery, save function setting will be memorized.
4. The lower limited value in cooling mode is 16°C and the upper limited value in heating
5. After save setting, if the setting temperature is out of the range in the mode, the limited
FUNCTION CONTROL
temperature in heating mode. After that, press Enter/Cancel button to turn on energy
saving function for heating.
After energy saving function is turned on, press Function button into energy saving
function and press Enter/Cancel button to cancel this function.
The energy saving setting is shown in the fig.3.4.10.
Fig.3.4.10 Energy Saving Setting
corresponding mode. After setting of save, sleep function will be canceled.
the last button operation, the system will be quit from save function setting and current
data won't be memorized.
mode is 30°C.
value will prevail.
50