Timing Belt Removal - Westerbeke 9.0 BCG Technical Manual

11. Remove the fuel line, the carburetor, the fuel pump (including the push rod on the BeG 4.0KW engine),
and the intake manifold.
12. Remove the ignition coil and its mounting bracket.
13. Remove the engine's backplate.
14. Remove the water temperature switch and the water temperature sender.
15. Remove the oil pressure switch, the oil pressure sender, the oil filter, and the oil filter bracket.
16. Remove the thermostat housing and the thermostat.
17. Remove the crankshaft pulley from the crankshaft.
18. Remove the spark plugs from the cylinder head.
19. Remove the distributor from the right rear of the engine.
The basic engine assembly is now ready for disassembly, cleaning, inspection, and repair if necessary.
Since the BeG 4.0KW, the BeG 6.5KW and the BTG 9.0KW generator engines are not as bulky nor as heavy
as an automobile engine, the engines may be laid on a sturdy bench while they are disassembled and
repaired.
Timing Belt Removal
1. Remove the crankshaft pulley from the crankshaft.
BCG 4.9KW
CRANKSHAFT PULLEY
Westerbeke Generators
68
BCG 6.SKW AND BTG 9.8KW
CRANKSHAFT PULLEY