Westerbeke 9.0 BCG Technical Manual page 51

BCG 6.5 KW SYSTEM SPECIFICATION
Sea Water Pump
Sea Water Flow, at 1800 rpm
(measured before discharging
into exhaust elbow)
System Capacity
LUBRICATION SYSTEM
General
Oil Filter
Sump Capacity (not including filter)
Operating Oil Pressure (engine hot)
Oil Grade
ELECTRICAL SYSTEM
Starting Battery
Battery Capacity
DC Battery Charger
Starter
DC No-Load Current
DC Cranking Current
Positive displacement, rubber impeller, belt-driven.
3.75 - 4.0 gpm (14.19 -15.14Ipm)
5.2 qts (4.9 liters) approximate.
Pressure type by Trochoid pump
chain-driven through balance shafts.
Full flow, paper element, spin-on type.
3.0 qts (2.9 liters)
50 - 70 psi (3.5 - 4.9 kg/cm
2 )
API
~PECIFICATION
OF SE
i
SF, SG OR SJ.
12-volt, 30 A-H, (-) negative ground.
(recommended) (45 A-H in cold areas)
90 - 125 (ampere-hours)
Integral controller 13 volts,
a -
10 amps.
12-volt, 1.2t<YV, reduction type,
solenoid-mounted.
90 amp (max.) at 11.5 volts.
175 - 200 amps (engine cold)
45
Westerbeke Generators