Westerbeke 9.0 BCG Technical Manual page 81

1. Mount the cylinder head, while supporting it in an appropriate holder, to allow for the removal of the valve
springs, valves and guides as needed.
Remove the valves and their associated parts using the valve spring replacer (special service tool [SST]
#37728 for the BCG 4.0KW engine, the BCG 6.5KW and the BTG 9.0KW engines).
NOTE: As the valves and their associated parts are removed, keep valve sets together and in
correct order with respect to their placement in the cylinder head. Unless any of the parts are
replaced, they must be returned to the same locations from which they were removed.
2. Remove the distributor housing.
75 Westerbeke Generators