12. Replace the two copper washers - one is
placed above the nozzle and the second is
placed below the nozzle. Snug down the
nozzle's retaining screw.
Do not over
tighten the screw.
13. Replace the cover straight down on the car-
buretor' and hand tighten the cover screws
as indicated in the photograph shown to the
right.
Snug down each screw,
Over
tightening these screws can strip the
threads in the carburetor. Replace the
electric choke's stabilizing screw.
14'. Replace\the choke lever spring.
Westerbeke Generators
122