Westerbeke 9.0 BCG Technical Manual page 63

Ignition System
Distributor
Ignition coil
Condenser capacity - uf (microfarads)
BCG4.0KW
BCG 6.5KW and BTG 9.0KW
Contact point clearance - inch (mm)
Dwell angle - degrees
BCG4.0KW
BCG 6.5KW and BTG 9.0KW
Primary coil resistance
Secondary coil resistance
Resistor resistance
Lubricating System
Specified Value
0.225 - 0.275
0.27
0.016 - 0.020
(0.4 - 0.5 mm)
95 -101
58-66
ohms 0.98
±
0.1
ohms 17.5
±
2.6
ohms 1.92
±
0.2
General
Pressure type with Trochoid pump,
chain-driven through balance shaft.
Allowable Limit
Oil filter
Full flow, paper element, spin-cartridge.
Oil sump capacity (filter not included) - qts (liters)
Oil pressure at 1800 rpm engine speed
(engine hot)
Oil pump
Oil pump chain
deflection - inches (mm)
Shaft-to-bodY clearance - inches (mm)
Tip clearance (inner to outer
rotor) - inches (mm)
Side clearance (rotor end float)
Body clearance (outer rotor-
to-body) - inches (mm)
57
3.0 (2.9 liters)
50 -70 psi
3.5 - 4.9 kg/cm
2
0.008 - 0.0033
(0.045 - 0.085 mm)
0.0059 (0.15 mm)
0.0012 - 0.0035
(0.03 - 0.09 mm)
0.0039 - 0.0063
(0.10 - 0.16 mm)
0.275 (7 mm)
0.0039 (0.10 mm)
0.0098 (0.25 mm)
0.0079 (0.20 mm)
0.0118 (0.30 mm)
Westerbeke Generators