Westerbeke 9.0 BCG Technical Manual page 20

Generator Mounting - Location
The complete generator unit is mounted on lightweight rails by means of four flexible isolator mounts that
hel p prevent the transfer of vibration from the generator to the rails. Each generator mounting rail has several
1/2 inch bolt holes so bolts can be employed to properly secure the generator to its mounting platform.
These holes are on 14.5 inch mounting centers.
The location should be dry, above low-lying vapor areas, and away from being splashed by bilge water or
water from above. It should be properly ventilated and accessible for minor servicing and repairs. Access
for major repairs should be given consideration as well. The location should be properly ventilated to provide
fresh cooling air for the generator end and for engine combustion. The generator set needs fresh cool air
in whatever location in the vessel it is installed. Hot generator discharge air
~
be removed from the
generator area. The platform on which the generator and its mounting rails are located should be strong
enough to support the generator during all angles of vessel operation.
Westerbeke Generators 14