1. Remove the flame arrestor's clamp and ar-
restor, the fuel solenoid wire, the electric
choke wires, the fuel supply line, and the
throttle control linkage.
2. Remove the carburetor from the intake
manifold.
3. Remove the electric choke's stabilizing
screw.
4. Remove the four cover screws, and lift the top
portion of the carburetor straight up and
away from the carburetor base. See pictures
below.
FLAME
_~::~~~~~~
ARRESTOR
CLAMP
FUEL
LINE
INLET FILTER
PLUG
SOLENOID
119
Westerbeke Generators