Maintenance; Software Upgrade - avertX HD354IR User Manual

MAINTENANCE

SOFTWARE UPGRADE

New versions of camera firmware is available periodically and can be found at
http://www.avertx.com/product-downloads/.
Make sure the software upgrade file is available before starting the software upgrade.
Note:
1. Click Setup > Maintenance > Maintenance.
2. Under Local Upgrade, click Browse and select the correct upgrade file.
3. Click Upgrade and then confirm to start. The camera will restart automatically after the
upgrade is completed.
Note: You must use the correct upgrade file for you camera. Otherwise, unexpected results may
occur.
The upgrade file is a ZIP file and must include all the necessary files.
•
• The boot program loads the operating system and then the system starts running. The
upgrade boot program function is disabled by default, and only the camera will be upgraded
to the latest version. If enabled, both the camera and the boot program are upgraded, and the
operating system of the following new versions can be booted properly, and the camera can
be upgraded conveniently.
• The device will restart after the upgrade is completed.
58