Table of Contents
Advertisement
CONFIG MANAGEMENT
Export the current configurations of the camera and save them to the PC or an external storage
medium. You can also quickly restore configurations by importing backup configurations stored on the
PC or an external storage medium back to the camera.
CAUTION!
After you perform the Default operation, all settings are restored to factory defaults,
except the following: login password of the system administrator, network settings, and
system time.
Make sure you import the correct configuration file for your camera. Otherwise,
unexpected results may occur. The camera will restart when the configuration file is
imported successfully.
1. Click Setup > Maintenance > Maintenance.
2. To import configurations that you have backed up, click Browse next to the Import button
and select the configurations you want to import, and then click Import. The result will be
displayed.
3. To export configurations, click Browse next to the Export button, select the destination
folder, and then click Export.
4. To restore default configurations, click Default and then confirm the operation. The device
will restart and restore the default configurations.
DIAGNOSIS INFO
Diagnosis information includes logs and system configurations. You can export diagnosis information to
your PC.
1. Click Setup > Maintenance > Maintenance.
2. In the Export Diagnosis Info area, click Export.
DEVICE RESTART
1. Click Setup > Maintenance > Maintenance.
2. Under Device Restart, click Restart. The device will restart after you confirm the operation.
CAUTION!
Perform this operation with caution because restarting the system interrupts the ongoing
service.
38062AA
59
Advertisement
Table of Contents
