Table of Contents
Advertisement
To configure Linkage Method for Motion Detection:
Check Upload to FTP/Memory Card/NAS to capture images and/or record video when
•
motion is detected and upload the output to the on-board storage.
Requires microSD card installed in camera. (Not Included)
o
Note:
Refer to Storage > Schedule Settings & Storage > Storage Management sections of
this manual to configure microSD card storage.
Storage
Schedule Settings
Record Schedule
This camera includes an integrated microSD™ card slot that can be used to record video. The card slot is
compatible with a microSD™ card up to 128GB. This section is used to define when video should be
recorded to the microSD™ card.
To configure record schedule:
1. Check Enable to enable scheduled recording.
2. Click Advanced to set the camera record parameters.
3. Select the record type, and click-and-drag the mouse on the time bar to set the record schedule.
4. Click Save to save the settings.
Pre-record: length of time set to start recording before the scheduled time or the event. The Pre-record
time can be configured as No Pre-record, 5s, 10s, 15s, 20s, 25s, 30s or not limited.
37080AA
47
Advertisement
Table of Contents
