Multifunction Display (Mfd) - Skoda YETI Owner's Manual

Gear recommendation - segment display
The recommended gear and the arrow icon is displayed.
1)
▶
 - Recommends that you change up to a higher gear
▶
 - Recommends that you change down to a lower gear
If the display shows for example   in vehicles with a manual gearbox, this
means it is better to switch from a lower gear to the fourth gear.
If for example   is shown in the display in vehicles with an automatic gearbox
which is in manual switching mode (Tiptronic), it is better to switch from the
fourth gear to a higher gear.
WARNING
The driver is always responsible for selecting the correct gear in different
driving situations, such as overtaking.

Multifunction display (MFD)


Introduction
This chapter contains information on the following subjects:
Operation
Information overview
Warning when exceeding the set speed
Memory
The driving data is displayed on the multifunction display.
The multifunction display only operates if the ignition is switched on. After the
ignition is switched on, the function that was last selected before switching
off the ignition is displayed.
For vehicles with a MAXI DOT display, the menu item MFD must be selected and
confirmed in the main menu » page
On vehicles with a MAXI DOT display, there is an option to fade out some of
the information » page 47, Menu item Settings.
1) With vehicles that have an automatic gearbox and in the manual switching mode (Tiptronic) the current-
ly engaged gear is shown.
43, MAXI DOT display.
WARNING
Concentrate fully at all times on your driving! As the driver, you are fully re-
sponsible for the operation of your vehicle.
Note
If the display of the second speed is activated in mph, the current speed is not
indicated in km/h on the display.
Operation
Fig. 28 Buttons/dial: on the operating lever/the multifunction steering
41
wheel
42
42

Read and observe on page 41 first.
43
The selection as well as the settings of the data values can be operated with
the buttons on the operating lever as well as on the multi-function steering
wheel » Fig. 28.
Description of the operation
Button /
Action
dial
Briefly press at the top
A
or down
Press briefly
B
Operation
Select data / set data values
View information / confirm specifica-
tion
Information system

41