No route guidance is carried out
A compass/vehicle symbol is shown to display the current vehicle position in
relation to the compass after selection.
Menu itemAudio
Read and observe
on page 44 first.
Select menu item Audio
›
Select and confirm Audio in the main menu.
The information displayed in MAXI DOT display
Radio
■
■
is the currently played station (name/frequency)
The selected frequency range (e.g. FM) optionally with the number of the
■
station button (e.g. FM3), if the station is stored in the memory list
■
List of available station (if more than 5 stations can be received)
TP traffic announcements.
■
Media
■
■
For information on the track
Menu itemPhone
Read and observe
on page 44 first.
Select menu item Phone
›
Select and confirm Phone in the main menu.
›
Turn the dial
» Fig. 31
on page 45.
G
The system displays a call list.
If the call list includes no entries, the following message appears No entries avail-
able.
The following symbols are displayed next to each entry in the call list.
Incoming call
Outgoing call
Missed call
Outgoing call
Hang up - End a call
■
1)
This function is only supported by some mobile phones.
46
Using the system
Incoming call
■
Answer – Accept incoming call
Reject – Reject incoming call
■
Ongoing call
■
Hang up - End a call
Hold/Switch on - Hold call/restore call
■
Private/Hands-free - Switch call to the phone/switch call to the device
■
■
Mic. off / Mic. on - Switch off the microphone / switch on the microphone
Incoming call during an ongoing call
Answer – Accept incoming call and hold the ongoing call
■
■
Reject - Rejects incoming call
Replace – Replace the ongoing call with the incoming call
■
Ongoing and held call
Hang up – End an ongoing call
■
Switch – Switch from ongoing call to held call
■
Conference – Connect ongoing and held call to the conference call
■
Mic. off / Mic. on - Switch off the microphone / switch on the microphone
■
Conference call
■
Hang up - End conference call
Hold - Hold conference call
■
Mic. off / Mic. on - Switch off the microphone / switch on the microphone
■
Symbols in the display
Charge status of the telephone battery
Signal strength
1)
A telephone is connected to the unit
Missed calls (if there are several missed calls, the number of calls is shown
next to the symbol)
Menu itemAssistants
Read and observe
on page 44 first.
Select menu item Assistants
›
Select and confirm Assistants in the main menu.
1)