Multimedia Holder - Skoda YETI Owner's Manual

Multimedia holder


Introduction
This chapter contains information on the following subjects:
Install/remove
Handle holder
External devices (e.g. tablet, smartphone, etc.) measuring min. 122 mm and
max. 195 mm can be secured in the support.
The maximum permissible load of the compartment is 750 g.
CAUTION
Never exceed the maximum permissible load of the holder - there is a risk of
damage or functional impairment.
Install/remove
Fig. 102 Position adapter/install holder
95
95
Fig. 103 Remove holder/remove adapter

Read and observe on page 95 first.
Fitting
›
Attach the opened adapter to the guide rods of the headrest
›
Clip in the adapter in the direction of arrow
›
Clip the holder in the direction of arrow
Removing
›
Pull on the locking strap
›
Remove the holder from the bracket in the direction of arrow
›
Press the adapter and remove from the guide rods of the headrest in the di-
rection of arrow .
5
WARNING
Carefully clip in the adapter - there is a risk of injuring your finger.
Handle holder
Fig. 104 Tilt and rotate holder
» .
1
into the adapter.
2
in the direction of arrow » Fig.
A 3
Transporting and practical equipment
» Fig. 102.
103.
.
4

95