Electrical operation of the sunblind
Read and observe
on page 61 first.
The sliding sun blind (hereinafter referred to as sun blind) can be opened or
closed using the buttons.
Operation of the sun blind
» Fig. 46
Opening
Closing
By briefly pressing the button, the sun blind is fully opened or closed. The
movement of the sun blind can be stopped by briefly pressing any key.
By pressing and holding the key, the sun blind is opened or closed in the de-
sired position. By releasing the key, the opening or closing process is stopped.
WARNING
When operating the sun blind, proceed with caution to avoid causing crush-
ing injuries – risk of injury!
Malfunction of the sun blind
Read and observe
on page 61 first.
If the battery has been disconnected and reconnected, it is possible that the
sun blind will not operate correctly. The sun blind must be activated.
Activation sequence
›
Switch on the ignition.
›
Set the switch to the position
›
Press the button and hold down.
The sun screen opens and closes again after around 10 seconds.
Fig. 46
Operation of the sun blind
» Fig. 46
on page 63.
›
Release the button.
63
Unlocking and opening