Skoda YETI Owner's Manual page 76

The mirror dimming is controlled by the light incident on the sensors on the
front and back of the mirror.
When the interior lights are switched on or the reverse gear is engaged, the
mirror moves back into the basic position (not dimmed).
Do not attach external devices (e.g. navigation systems) on to the windscreen
or in the vicinity of the interior mirror
WARNING
The illuminated display of an external navigation device can lead to op-
■
erational faults to the automatic dimming interior mirror – risk of accident.
Automatic mirror dimming only operates correctly if the light striking the
■
sensor is not affected by other objects.
Exterior mirrors

Read and observe on page 73 first.
The knob can be moved into the following positions (depending on vehicle
equipment).
Adjust the left mirror

Adjust the right mirror

Switch off mirror control

Mirror heater

Fold in both mirrors housings, to fold back move the knob to another posi-

tion
The mirror heating only works when the engine is running.
Adjust the position
The mirror can be adjusted to the desired position by moving the knob in the
direction of the arrow » Fig. 60.
74
Using the system
» .
Fig. 60
Exterior mirror operation
The movement of the mirror surface is identical to the movement of the rotary
knob.
If the electrical mirror setting fails at any time, the mirrors can be adjusted by
hand by pressing on the edge of the mirror surface.
Synchronous adjustment of the mirror
›
Activate the synchronous adjustment of the mirror above the MAXI DOT dis-
play in the menu item Mirror adjust.
›
Turn the knob for the mirror control to the position for the driver mirror ad-
justment.
›
Adjust the mirror to the desired position.
Folding-in both of the exterior mirrors using the remote control key
›
Close all windows.
›
Press  on the remote control key for about 2 seconds.
The exterior mirror is folded back into the driving position when the ignition is
switched on.
Mirror with automatic dimming
The exterior mirror blackout is controlled together with the automatic dimming
interior mirror » page 73.
Memory function for mirrors
Valid for vehicles with electrically adjustable driver's seat.
It is possible to save the current setting of the exterior mirror when saving the
driver's seat position with » page
justable seator » page 77, Memory function of the remote control key.
Fold in passenger's mirror
Valid for vehicles with electrically adjustable driver's seat.
The passenger-side mirror can be tilted to the stored position to improve the
view to the curb when reversing.
Operating conditions.
The function is activated via the MAXI DOT display in the menu item Mirror

down » page 47, Menu item Settings.
The mirror setting has been previously stored

tion of the electrically adjustable seator
the remote control key.
The reverse gear is engaged.

The knob for the mirror control is in the position for the passenger mirror

adjustment.
» page 47, Menu item Settings.
76, Memory Function of the electrically ad-
» page 76, Memory Func-
» page 77, Memory function of
