Fig - Skoda YETI Owner's Manual

WARNING
For your own safety and that of other road users, ensure that all the win-
■
dows are free of ice, snow and misting. The blower should always be on to
prevent the windows from misting up.
Under certain circumstances, air at a temperature of about 5 °C can flow
■
out of the vents when the cooling system is switched on.
CAUTION
The air inlet in front of the windscreen must be free of e.g. ice, snow or
■
leaves to ensure that the heating and cooling system operates properly.
After switching on the cooling Condensation from the evaporator of the air
■
conditioning may drip down and form a puddle below the vehicle. This is not a
leak!
If the coolant temperature is too high, the cooling system is switched off to
■
ensure that the engine cools down.
Heating and manual air conditioning
Fig. 122 Heating Controls
Fig. 123 Controls of the manual air conditioning

Read and observe and
Individual functions can be set or switched on by turning the dial or pressing
the corresponding button. When the function is activated, a warning light illu-
minates in the button.
Functions of the individual control elements
Set the temperature
A
▶
Lower the temperature

▶
Increase the temperature

Set the fan speed (stage 0: fan off, level 4: high speed)
B
Set the direction of the air outlet
C
▶
 Air flow to the windows
▶
 Air flow to the upper body
▶
 Air flow to the footwell
▶
 Air flow to the windows and the footwell
Switching the cooling system on/off

Switching the rear window heater on/off

Switch the aux. heating and ventilation on/off

Switch the recirculation on/off

Control the seat heater on the front left seat

Control the seat heater on the front right seat

Information on cooling system
The cooling system operates only if the following conditions are met
» page 104.
on page 105 first.
» Fig. 122 and » Fig. 123
» page 108
» page 70
» page 110
» page 107
» page 78
» page 78
Heating and ventilation

105