Multifunction Display (Mfd) - Skoda yeti Owner's Manual

Operation via the multifunction steering wheel
Fig. 25 Buttons/dials on the multifunction steering wheel
Buttons/dials on the multifunction steering wheel
PressChange frequency range (e.g. FM/AM/DAB) / Switch audio source

(e.g. SD card/USB input)
Turn - sets the volume
A
Press - sound on / off
Skip to next track/station

Switch to previous track/station

Switch on/off voice control

Press - display the telephone menu; accept call/ hang up; call selected

contact
Hold - repeat last call; reject call
Operating the multifunction display
Turn - select data / set values
B
Press Show / confirm entry
Operating the MAXI DOT display
Hold - display main menu

Press - return to a previous level in the menu
Turn - move in the selected menu
B
Press - confirm selected menu item
Notice
Depending on equipment not all functions may be available. Based on this, the
system indicates this via a text message on the display.
42
Using the system

Multifunction display (MFD)


Introduction
This chapter contains information on the following subjects:
Data overview
Warning when exceeding the set speed
Memory
The driving data is displayed on the multifunction display. After the ignition is
switched on, the function that was last selected before switching off the igni-
tion is displayed.
If vehicles with MAXI DOTdisplay do not show the driving data after switching
on the ignition, select the menu item MFD in the main menu and confirm
» page 44, MAXI DOT display.
On vehicles with a MAXI DOT display, there is an option to fade out the units
and some of the information » page
Notice
If the display of the second speed is activated in mph, the current speed is not
indicated in km/h on the display.
Data overview
Overview of driving data (depending on the vehicle equipment).
Outside temperatureFor vehicles with a MAXI DOT display this information is
always shown.
Driving time - Driving time since last clearing the memory.
Current fuel consumption - When the vehicle is stationary or moving slowly,
the fuel consumption is displayed in l/h (in models in some countries the fol-
lowing appears --,- km/l).
Average fuel consumption - Is calculated continuously since the last time that
the memory was erased. After erasing the memory, no data will appear for the
first 300 m driven.
Range - Drive distance in km which can be covered with the existing tank ca-
pacity and with the same driving style. If you drive more efficiently this value
can increase.
45, Menu item settings.
42
43
43
