Skoda YETI Owner's Manual page 78

Manually adjusting seats

Read and observe on page 75 first.
The seats can be adjusted by the respective operating element being pulled
pressed or rotated in the direction of arrows.
Control elements on the seat » Fig. 61
Adjusting the seat in the longitudinal direction (after releasing the control
A
lever, locking must be audible)
Adjusting the seat height
B
Adjusting the tilt of the backrest (do not lean on the backrest when ad-
C
justing)
Setting the extent of the curvature of the lumbar support
D
Electrical adjustment
Fig. 62 Control elements on the seat
76
Using the system
Fig. 61
Control elements on the seat

Read and observe on page 75 first.
The seats can be adjusted by the respective operating element being pressed
in the direction of area of the arrow.
Control elements on the seat » Fig. 62
seat adjustment
A
▶
1 - Move in the longitudinal direction
▶
2 - Change in inclination
▶
3 - Change in height
Adjusting the seat backrest
B
▶
4 - Change in inclination
Adjusting lumbar support
C
▶
5 - Change curvature
▶
6 - The degree of curvature change
Note
If the setting procedure is interrupted, you will need to press the operating el-
ement again.
Memory Function of the electrically adjustable seat

Read and observe on page 75 first.
The pre-set buttons on the driver's seat make it possible to save the driver's
seat and exterior mirror positions.
Each of the three memory buttons
Storing driver's seat and exterior mirror settings for driving forward
›
Switch on the ignition.
›
Adjust the seat and the two mirrors to the desired position.
›
Press the  button (Position
A
Fig. 63
Memory buttons and SET button
» Fig. 63 can be assigned a set position.
B
» Fig. 63).
