Skoda YETI Owner's Manual page 108

The warning light in the button 
if not all of the conditions for the function of the cooling system have been
met. By lighting up of the indicator light in the button, the operational readi-
ness of the cooling system is signalled.
Note
During operation of the manual air conditioning, an increase in engine idle
speed may occur under certain circumstances in order to ensure sufficient
heating comfort.
Climatronic (automatic air conditioning)
Fig. 124 Controls the Climatronic

Read and observe and
The Climatronic in automatic mode ensures the best-possible setting of the
temperature of the out-flowing air, the blower stage and air distribution.
Individual functions can be set or switched on by turning the dial or pressing
the corresponding button. When the function is activated, a warning light illu-
minates in the button.
Functions of the individual controls
Adjust the temperature for the left side or for both sides
A
▶
Lower the temperature

▶
Increase the temperature

Interior temperature sensor
B
Depending on equipment fitted:
C
▶
 Switching the windscreen heater on/off
▶
 Switch the aux. heating and ventilation on/off
106
Using the system
» Fig. 123 illuminates after activation, even
on page 105 first.
» Fig. 124
» page 70
» page 110
Adjust the temperature for the right side
D
▶
Lower the temperature

▶
Increase the temperature

Control the seat heater on the front left seat

Control the seat heater on the front right seat

Adjust the blower speed

▶
+ Increase speed
▶
- Reduce speed
Switch the intensive windscreen heater on/off

Air flow to the windows

Air flow to the upper body

Air flow in the footwell

Switch the automatic recirculation on/off

Switch the rear window heater on/off

Switching automatic mode on

Switch the Climatronic system off

Switching the cooling system on/off

Switch the temperature setting in Dual mode on/off

After the cooling system is switched off, only the ventilation function remains
active whereby the minimum temperature that can be reached is the outside
temperature.
Setting temperature
The interior temperature for the left and right side can be set separately or to-
gether.
The temperature for both sides, is set by turning the knob
indicator light in the button  is not illuminated).
The temperature for the right side is adjusted by turning the knob
dicator light in the button  is lit).
The temperature for the left side is adjusted by turning the knob
cator light in the button  is lit).
The temperature can be set between +18 °C and +26 °C. The temperature is
regulated automatically within this range.
If the symbol illuminates at the beginning of the numeric scale then the Cli-

matronic works with maximum cooling (temperature setting below +18 °C).
» page 78
» page 78
» page 107
» page 70
»
» Fig. 124
A
(the in-
D
(the indi-
A
(the
