Wheels; Tyres And Wheel Rims - Skoda YETI Owner's Manual

Wheels

Tyres and wheel rims


Introduction
This chapter contains information on the following subjects:
Notes on using wheels
Tyre pressure
Tyre wear
Tyre wear indicator and wheel replacement
Tyre damage
Unidirectional tyres
Spare wheel
Spare wheel
Tyre label
Only use tyres or wheel rims that have been approved by ŠKODA for your mod-
el of vehicle.
WARNING
For reasons of driving safety, do not replace tyres individually.
Note
We recommend that any work on the wheels or tyres be carried out by a spe-
■
cialist garage.
We recommend that you use wheel rims, tyres, full wheel trims and snow
■
chains from ŠKODA Original Accessories.
Notes on using wheels

Read and observe on page 176 first.
New tyres do not offer optimum grip during the first 500 km and appropriate
care should therefore be taken when driving.
Always fit the tyres with the deeper tread depth to the front wheels.
Tyre storage
Identify disassembled tyres so that the previous direction of rotation can be
maintained if the tyres are reassembled.
176
General Maintenance
Always store wheels or tyres in a cool, dry place that is as dark as possible.
Tyres which are not fixed to a wheel trim should be stored upright.
Tyre age
Tyres age and lose their original characteristics, even if they are not being
used. The service life of the tyres is 6 years. Therefore, we recommend not us-
ing tyres that are older than 6 years.
Wheel bolts
176
Wheels and wheel bolts are matched to each other in terms of design. We rec-
176
ommend that you use wheel rims, wheel bolts from ŠKODA Original Accesso-
177
ries.
178
WARNING
178
Never use tyres if you do not know anything about the condition and age.
178
178
179
Tyre pressure
179
Fig. 174 Label with a table of tyre sizes and tyre pressure value / inflate
tyres

Read and observe
The prescribed tyre inflation is on the sticker with pictograms
some countries, the pictograms are replaced with a text).
Tyre pressure is always to match the load.
Inflation pressure for half load
B
Inflation pressure for environmentally-friendly operation
C
As a result of pressure level adaption to this value, the fuel consumption
and pollutant emissions may fall slightly.
Inflation pressure for full load
D
on page 176 first.
» Fig. 174 (for
A
