Seat Belts - Mitsubishi Mirage 2017 Owner's Manual

Seat belts

To remove
Press the lock knob (A) in the direction
shown by the arrows. Then pull the head
restraint up and out of the seatback.
4
WARNING
 To help minimize the risk of neck injury in
the event of an accident, the head
restraints must be properly installed and
positioned to proper height before vehicle
operation.
To install
First check that the head restraint is facing in
the right direction as shown in the previous
illustration, and then insert it into the seat-
back. Push the head restraint down while
4-8 Seat and restraint systems
pressing the lock knob (A) until the restraint
locks into place.
CAUTION
 Check that the lock knob (A) is extended out
as shown in the illustration. Then pull the
head restraint up to make sure that it is
locked in place and will not come out of the
seatback.
CAUTION
 The shape and size of the head restraint dif-
fers according to the seat. Always use the
correct head restraint provided for the seat
and do not install the head restraint in the
wrong direction.
Seat belts
Seat belts are installed in your vehicle to help
reduce the risk of injury to the driver and pas-
senger in the event of an accident. Always
use the provided seat belts.
Carefully review the following information
for proper seat belt usage.
WARNING
 To help reduce the risk of injury or death
in an accident, seat belts and child
restraint systems must always be used.
Refer to "Child restraint systems" on page
4-14 for additional information.
 Never use one seat belt for more than one
person.
 Never carry more people in your vehicle
than there are seat belts.
 Always adjust the seat belt for a snug fit.
N00406001481