Limited Ip Multicast Range - D-Link Xstack DGS-3600 Series User Manual

Limited IP Multicast Range

The Limited IP Multicast Range window allows
the user to specify which multicast address(es)
reports are to be received on specified ports on the
Switch. This function will therefore limit the number
of reports received and the number of multicast
groups configured on the Switch. The user may set
an IP address or range of IP addresses, by entering a
pre-configured Range Name, to accept reports
(Permit) or deny reports (Deny) coming into the
specified switch ports. Click L2 Features > IGMP
Snooping > Limited Multicast Address Range
Settings to display the adjacent window:
To configure Limited IP Multicast Range:
Use the remaining pull-down menus to configure the
parameters described below:
Parameter Description
Limited IP Multicast Address Range Port
Settings (Click Apply to save changes)
From...
Select a range of ports to be
To... granted access or denied access
from receiving multicast information.
Access Toggle the Access field to either
Permit or Deny to limit or grant
access to a specified range of
Multicast addresses on a particular
port or range of ports.
Limited IP Multicast Address Range
Settings
From... Select a port or range of ports to be
To... allowed
information from a specific multicast
IP range.
Range Enter the pre-configured Range
Name Name denoting a range of multicast
IP addresses for the ports listed in
the previous fields.
Add
Click this button to add the Range
Name to these ports.
Delete
Click this button to delete this range
name from the list of ports.
Delete
Click this button to delete all
All configured range names from the
list of ports.
Users may view the Limited Multicast IP Range settings on a port-by-port basis using the pull down menus under the Limited IP
Multicast Address Range Table by Port. Configured entries will be displayed in the Limited IP Multicast Address Range
Port Table.
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
access to multicast
Figure 7- 35. Limited IP Multicast Address Range Port Settings window
110