D-Link Xstack DGS-3600 Series User Manual page 89

Analyzer Server ID
Polling Interval
Click Apply to save changes made.
To edit an entry that has already been configured, click the Modify button of an entry in the sFlow Sampler Settings window
which will produce the following window for the user to configure. This window holds the same information as the previous Add
window and therefore, the previous descriptions of the parameters remain valid here. Click Apply to save changes made to this
window.
Please note that the Analyzer Server ID cannot be changed in this window. To change this setting, users must delete this entry and
configure a new entry with a new Analyzer server ID.
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Enter the previously configured Analyzer Server ID to state the device that will be receiving
datagrams from the Switch. These datagrams will include the counter poller information taken
using the polling mechanism configured here.
Users may configure the Polling Interval here. The switch will take a poll of the IF counters
every time this interval reaches 0, and this information will be included in the sFlow datagrams
that will be sent to the sFlow Analyzer for examination. Checking the Disabled check box will
disable the counter polling for this entry.
Figure 6- 63. sFlow Counter Poller – Edit window
72