Port Utilization - D-Link Xstack DGS-3600 Series User Manual

Port Utilization

The Utilization window displays the percentage of the total available bandwidth being used on the port. To view the port
utilization, open the Monitoring folder and then the Port Utilization link:
First select a switch in the switch stack using the Unit pull-down menu and then select a Port number from its drop down menu
and click Apply to display the Port Utilization for a particular port. The following fields can be set:
Parameter Description
Time Interval
Record Number
Click Clear to refresh the graph. Click Apply to set changes implemented.
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 12- 5. Port Utilization window
Select the desired setting between 1s and 60s, where "s" stands for seconds. The default
value is one second.
Select number of times the Switch will be polled between 20 and 200. The default value is
200.
292