D-Link Xstack DGS-3600 Series User Manual page 49

An example is presented below:
In this case, six IP interfaces are required, so a CIDR notation of 10.32.0.0/11 (or a 11-bit) addressing scheme will work. This
addressing scheme will give a subnet mask of 11111111.11100000.00000000.00000000 (binary) or 255.224.0.0 (decimal).
Using a 10.xxx.xxx.xxx IP address notation, the above example would give six network addresses and six subnets.
Any IP address from the allowed range of IP addresses for each subnet can be chosen as an IP address for an IP interface on the
switch.
For this example, we have chosen the next IP address above the network address for the IP interface's IP Address:
The six IP interfaces, each with an IP address (listed in the table above), and a subnet mask of 255.224.0.0 can be entered into the
Setup IP Interface window.
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
VLAN Name VID
System (default) 1
Engineer 2
Marketing 3
Finance 4
Sales 5
Backbone 6
Table 6- 1. VLAN Example - Assigned Ports
VLAN Name VID
System (default) 1
Engineer 2
Marketing 3
Finance 4
Sales 5
Backbone 6
Table 6- 2. VLAN Example - Assigned IP Interfaces
Switch Ports
5, 6, 7, 8, 21, 22, 23, 24
9, 10, 11, 12
13, 14, 15, 16
17, 18, 19, 20
1, 2, 3, 4
25, 26
Network Number
10.32.0.0 10.32.0.1
10.64.0.0 10.64.0.1
10.96.0.0 10.96.0.1
10.128.0.0 10.128.0.1
10.160.0.0 10.160.0.1
10.192.0.0 10.192.0.1
32
IP Address