D-Link Xstack DGS-3600 Series User Manual page 107

The following fields can then be set in either the Add or Modify 802.1Q Static VLANs windows:
Parameter
Unit
VID (VLAN ID)
VLAN Name
Advertisement
Port Settings - Allows an individual port to be specified as member of a VLAN.
Tag
None
Egress
Forbidden
Click Apply to implement changes made.
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
Figure 7- 7. Static VLAN window - Modify
Description
Choose the switch in the switch stack for which to modify VLANs.
Allows the entry of a VLAN ID in the Add window, or displays the VLAN ID of an existing
VLAN in the Modify window. VLANs can be identified by either the VID or the VLAN name.
Allows the entry of a name for the new VLAN in the Add window, or displays the VLAN name
in the Modify window.
Enabling this function will allow the Switch to send out GVRP packets to outside sources,
notifying that they may join the existing VLAN.
Specifies the port as either 802.1Q tagging or 802.1Q untagged. Checking the box will desig-
nate the port as Tagged.
Allows an individual port to be specified as a non-VLAN member.
Select this to specify the port as a static member of the VLAN. Egress member ports are ports
that will be transmitting traffic for the VLAN. These ports can be either tagged or untagged.
Select this to specify the port as not being a member of the VLAN and that the port is
forbidden from becoming a member of the VLAN dynamically.
90