D-Link Xstack DGS-3600 Series User Manual page 244

Figure 10- 17. Access Profile Entry Display window (Packet Content Mask)
To configure the Access Rule for IPv6, open the Access Profile Table and click Modify for an IPv6 entry. This will open the
following screen:
To remove a previously created rule, click its corresponding
To set the Access Rule for the IPv6, adjust the following parameters and click Apply.
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
NOTE: When using the ACL Mirror function, ensure that the Port Mirroring
function is enabled and a target mirror port is set.
Figure 10- 1 . Access Rule Table window (IPv6) 8
Figure 10- 1 . Access Rule Configuration window (IPv6) 9
button. To add a new Access Rule, click the Add Rule button:
227