Ospf Interface Settings - D-Link Xstack DGS-3600 Series User Manual
Gigabit ethernet managed switch
Hide thumbs
Also See for Xstack DGS-3600 Series:
- User manual (433 pages) ,
- Cli manual (431 pages) ,
- Hardware installation manual (66 pages)
Table of Contents
Advertisement
xStack DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch
OSPF Interface Settings
To set up OSPF interfaces, click L3 Features > OSPF > OSPF Interface Settings to view OSPF settings for existing IP
interfaces. If there are no IP interfaces configured (besides the default System interface), only the System interface settings will
appear listed. To change settings for in IP interface, click on the hyperlinked name of the interface to see the configuration menu
for that interface.
Figure 8- 41. OSPF Interface Settings window
Figure 8- 42. OSPF Interface Settings - Edit window
Configure each IP interface individually using the OSPF Interface Settings - Edit menu. Click the Apply button when you have
entered the settings. The new configuration appears listed in the OSPF Interface Settings table. To return to the OSPF Interface
Settings table, click the
Show All OSPF Interface Entries
link.
OSPF interface settings are described below. Some OSPF interface settings require previously configured OSPF settings. Read the
descriptions below for details.
172
Advertisement
Table of Contents
