Rap 28 Mechanical Checkout - Xerox Document Workcenter 150 Service Manual

RAP 28 Mechanical Checkout
The following procedure applies to all gears,
shafts, rollers. springs. and bearings in these
=W?S.:
.
Upper and lower scanner
* Printer
Initial Actions
Disconnect the power cord,
Procedure
NOTE: Lubrication is only added or
replaced on those components which
were originally lubricated as
manufactured.
1. Inspect all of the following. Replace any pari
that is binding or damaged.
* shafts, shaft supports, or bearings
* cover latch spring or latches.
Assembly
Assembly
RAP 28 Mechanical Checkout
~-
DocumentWorkCenter150