ADJ 5.2
Head Gap
Purpose
The purpose is to set the distance from the print
head to the printing surface to ensure even image
quality from side to side.
NOTE: Head Gap Too1 600T1997 is
required to padoom, this pmcsdure.
Check
WARNING
Disconnect
the dower cord.
CAUTION
Leavino the
_
J ink cadridge removed for long
periods of time will rxuse the ink nozzles to
dfy out. Image quality problems or a blank
print could result. If necessary prime the ink
cartridge after reinstallation.
1.
Remove the ink cartridge.
2.
Install the Head Gap Tool into the Carriage
(Figure 1).
Figure 1
installing
the Head Gap Tool
ADJ 5.2 Head Gap
5/96
4-42
Document
WorkCenter
160