Xerox Document Workcenter 150 Service Manual page 9

Manual Revision Symbols Model Distinction
Revision pages containing the latest service
information~ will be sent to you so that you can
update your service manual. When a partial
revision is distributed, the changes will be
identified on each page.
TEXT
Text
Black vedical bar al the beginning of
the text for partial revisions.
If different paris or actions exist because of
different models, the model distinction (xxx) will
identify the appropriate part or action.
Example 1). - - - xxx: The sequence is.
Example 2) - - - The sequence is. (xxx).
When a partial revision or a complete manual
revision is distributed, the changes will also be
identified as follows:
Tag/MOD Distinction
Page
ManLLFll
The date of issue on the bottom of
each page.
An updated revision control list. This
list will identify the latest date for
each page.
TEXT
If different parts or actions exist because of a
modification, the Tag/MOD number will identify the
appropriate part or action.
Examplel).-----------Tag/MODl: PWB...
Example2) -----------PWBCTag/MODl)...
Terminology and Symbols
The following is the terminology and symbols that
are used in this manual for Warnings, Electrostatic
Device or general Cautions, and Notes.
Electra Static Discharge k,
Certain components in this product are susceptible
to damage from electrostatic discharge. Observe
all ESD procedures lo avoid component damage.
WARNING
Improper operation may result in injury to
a person.
CAUTtON
lmpmper operation may result in machine
damage.
NOTE: Hinfs orofher information that
may assist the LL%V
Additional Product Safety information
The following is additional product safely
, information for the Document WorkCenter 150.
I
CAUTION
The Main P WE has a lithium baffery which is
not a spared item. If the Main PWB fails,
relum the assembly to the Xerox premises
for disposal in accordance wilh local
regulations. DO NOT SHORT CIRCUIT THE
BATTERY TERMINALS.
Document WorkCenter 150
12/96
Y
Introduction