Rep4.3Adfmotor - Xerox Document Workcenter 150 Service Manual

REP 4.3 ADF Motor k,
Parts List on PL 4.1
Removal
WARNING
Disconnect the Power Cord from the
outlet.
1. Remove the following:
a. Front Cover (REP 1.1).
b. Rear Cover (REP 1.2).
c. Control Panel Assembly (REP 2.1).
d. Document Exit Guide (REP 2.2).
e. Printer and Tray Assembly (REP 3.1).
f.
Scanner and Guide Assembly (REP 3.3).
9. Scanner Assembly (REP 3.4).
NOTE: The ADF Motor flange is used to
hold the gears in place. Use care when
removing the motor so that the gears and
spacer stay in place.
2. Remove the ADF Motor (Figure 1).
Replacement
1. Reinstall the ADF Motor with the wires toward
the front of the machine.
2. Reinstall the remaining components in the
rever.se order.
I
d
:s 8
Figure 1
Removing the ADF Motor
REP 4.3 ADF Motor
5196
4-18
Document WorkCenter 150