Xerox Document Workcenter 150 Service Manual page 22

Display Messages and Communication error codes
If a" error code is available, refer lo Table 2. If no error code, refer to Table 1 for the message and the procedure.
not listed, return to section 1, additional checks.
If no error code is available and the message is
Display messages
ADD PAPER
Check Printer...
Table 1 Display Messages
Description
Procedures
The paper tray is empty or there is a
paperjam in the printer
Add more paper to the tray, if the tray is empty. Clear any paper jam. If the
problem continues, go to RAP 18, Paper Feeding.
There is a printer problem or paper Clear the paper jar". If the problem continues, go to RAP 18, Paper Feeding.
jam.
Check remote
Comm Error
Door Open
Feeder Jam
Remote machine had no document to Check remote machine and main PWB (REP 8.1).
poll
There is a communications problem. Refer to Table 2, Communications Error Codes.
The scanner is open Close the scannar. If the problem continues, go to RAP 17, Scanner Interlock.
The documents a&z not being fed Clear the document jam. If the problem continues. go to RAP 21, Document
correctly or they exceed the maximum Feeding.
No Cartridge
Load Documents
Long Original
OUT OF MEMORY
PRtNTER PROBLEM
Remote no answer
will Redial
length.
There is a problem detecting the print Go to RAP 20, Ink Carlridge
head position.
The document ssnsor does not sense Remove and reinsert the document. If the problem continues, go to RAP 21,
that a document was inserted. Document Feeding.
The document is longer than 1 meter.
Go to RAP 21. Document feeding.
Memory full Print the documents in memory, or divide the documents into smaller batches.
There is a printer problem or paper Clear the paper jam. If the problem continues, go to RAP 18, Paper Feeding.
jam.
The remote machine did not respond Go to RAP 25, Dialing and connecting.
Dial lone not detected or remote did Go to RAP 25, dialing and connecting.
not answer.
Display Messages
5/96
2-2
Document WorkCenter 150