Osd Setup Menu; Default Settings Description - Wirepath Surveillance WPS-565-DOM-A Installation Manual

6. OSD SETUP Menu

WPS-565 series cameras use an on-screen (OSD) menu system for setup of
advanced image and control settings.
Use the OSD SETUP menu to:
• Improve image quality — change settings to suit any environment;
• Set up advanced image features — parking lane, dead pixel compensation,
motion detection, privacy masking, and more;
• Display custom text options — choose whether or not to display options like
camera ID and where to position overlaid text;
• Configure RS485 — communicate between cameras and DVRs or other
security and automation systems.

6.1. Default Settings Description

Default settings for each SETUP menu section are written in bold type in the menu
overview to follow.
Defaults in the SETUP menu are optimized for the best balance of performance in
typical conditions:
• Daytime light should evenly illuminate the field of view. Setting changes can
be made to accommodate for moderate brightness and contrast issues. Too
much direct sunlight or glare from reflective and white surfaces should be
avoided.
• Night-time conditions should allow for the IR LEDs to reflect on surfaces within
range, or for artificial lighting to illuminate areas beyond IR range.
© 2014 Wirepath Surveillance
SETUP
LENS
EXPOSURE
WHITE BAL
BACKLIGHT
DAY&NIGHT
DPC
SPECIAL
EXIT
Default OSD menu view and settings
WPS-565-DOM-A Installation Manual
DC
ATW
BLC
EXT
SAVE
11