NEC EcoPowerGateway N8142-36F User Manual page 98

4-28 Configuring Your EcoPowerGateway
Boot
If you move the cursor to the position of "Boot", the Boot menu appears, which is used to set the
boot priority.
1.
When BIOS detects a bootable device, it displays the information on the device in the
relevant indication.
To boot the system from a desired device, the device must be registered as a boot device.
(Up to eight boot devices can be registered.)
2.
Pressing X after selecting a device allows the selected device to be registered as a boot
device or deleted from the registration.
With eight boot devices being registered, any other device cannot be registered as a boot
device even if you press X. To register a device as a boot device newly, first delete the
registration of a device registered as a boot device but not booted any more.
3.
You can change the boot priority (first to eighth) of each device by using ↑, ↓, + and/or –.
To change the priority of a device, move the cursor to the device by using the ↑ or ↓, and
press + or –.