Confirmation After Installation/Removal - NEC EcoPowerGateway N8142-36F User Manual

CONFIRMATION AFTER INSTALLATION/REMOVAL

Confirm the following after installing an option and removing a component:
Installing removed components exactly as they were
Install the components and cables, which were removed and disconnected for addition of
an option, exactly as they were. Assembling without a component being installed or a
cable being disconnected causes the equipment to malfunction.
Confirming the cooling effect in the equipment
Confirm that the ventilating holes are not covered with an internally connected cable.
Insufficient cooling effect raises the internal temperature, which causes the equipment to
malfunction.
Confirming operation with a tool
Some additional devices require the diagnostic utility or BIOS SETUP utility to check if
they are installed correctly. For details, see the procedure for additionally installing the
target device.
Installing Options 7-5