Memory Configuration - NEC EcoPowerGateway N8142-36F User Manual

Memory Configuration

Option Parameter
Installed –
memory
Available –
under 4GB
DIMM1 Normal
Status
Error
DIMM2 Normal
Status
[Not installed]
Error
Memory [No]
Retest Yes
Extended 1MB
RAM Step 1KB
[Every Location]
Disabled
Configuring Your EcoPowerGateway 4-11
Description
Indicates the capacity of mounted memory.
(View only)
Indicates the capacity of memory available in
the area smaller than 4GB. (View only)
Indicates the current memory status.
"Normal" indicates the normal status, and
"Error" indicates the memory error. (View
only).
Indicates the current memory status.
"Normal" indicates the normal status, "Error"
indicates the memory error, and "Not
installed" indicates no DIMM is installed.
(View only).
Set to "Yes" to clear the error information on
the memory, and perform retest. The
parameter is changed to "No" after the
system is booted.
1MB: The memory test is performed in the
unit of 1MB.
1KB: The memory test is performed in the
unit of 1KB.
Every-location: Every memory device is
tested.
Disabled: Only memory initialization is
performed.
Your Setting
[ ]: Factory-set