Table of Contents
Advertisement
2-16 General Description
2.
Press the Maintenance switch on the front side to start the maintenance mode.
The maintenance mode should be turned off in usual operation.
To prevent an incorrect operation, use the thin rod such as a pin to press the switch.
Maintenance switch
Press this switch
using a pin or the like.
3.
The initial diagnosis menu of maintenance card is displayed on the screen.
Perform the necessary operation according to BIOS SETUP menu or firmware update
procedure. See Chapter 4 for details.
Maintenance lamp
When pressed the
Maintenance switch,
make sure that this
lamp goes on green.
Advertisement
Table of Contents
Troubleshooting
