NEC EcoPowerGateway N8142-36F User Manual page 69

Rear Side
N8181-76F Additional
power units
(separately-priced)
*1) Two USB ports are supported. Use the USB hub as needed. The USB hub should have the self-power
specification if it is used.
*2) Only one separately-priced N8160-64 or N8160-85 external DVD-ROM drive can be connected to the USB
port.
 I MPORTANT: To connect a peripheral or interface cable provided by a
vendor other than NEC (or third party) to the EcoPowerGateway, make
sure that the device is available for the EcoPowerGateway. Some third
party devices are not available for the EcoPowerGateway.
Finally connect the provided
power cords to the receptacle.
Connect the server unit or Module Enclosure
that has the same interface with the
dedicated DC cable (K410-213).
Setting Up Your EcoPowerGateway 3-13
Network
system on LAN
(connected via
a multi-port
repeater)
(for
management)