NEC EcoPowerGateway N8142-36F User Manual page 92

4-22 Configuring Your EcoPowerGateway
Alert Test
Option
Primary
Alert Status
Secondary
Alert Status
Tertiary
Alert Status
* If you press Enter on the menu, the following message appears.
IMPORTANT: To perform alert test, select [BMC Configuration]
submenu and change parameters for [Common] and [BMC LAN1
Configuration] appropriately. Then, select [Exit] - [Save Changes] or
[Exit Saving Changes] to reflect the setting to BMC.
Parameter Description
[Enter] (*1) Press Enter and select "Yes" to send
test alert to the primary destination.
OK Indicates the alert sending status
(view only).
NG
Press Enter and select "Yes" to send
[Enter] (*1)
test alert to the secondary destination.
OK Indicates the alert sending status
(view only).
NG
[Enter] (*1) Press Enter and select "Yes" to send
test alert to the tertiary destination.
OK Indicates the alert sending status
(view only).
NG
Alert Test
Are you sure to test alert?
If you select "Yes", it may take a few minutes
to test alert. Please wait for a while.
[Yes] No
Your Setting
[ ]: Factory-set