NEC EcoPowerGateway N8142-36F User Manual page 75

Memory
To check the installed memory (DIMM) status
Select [Advanced] - [Memory Configuration] - [DIMM# Status] and check the status
indications.
To clear the memory (DIMM) error information
Select [Advanced] - [Memory Configuration] - [Memory Retest] - [Yes] and reboot the
system.
Processor
To check the installed processor status
Select [Main] - [Processor Settings] and check the status indications.
Keyboard
To set Numlock
Select [Advanced] - [Numlock] – [On]/[Off].
Security
To set passwords on the BIOS
Select [Security] - [Set Supervisor Password] and enter a password.
Set Supervisor password first, then set User password.
To enable/disable the Maintenance switch
To disable
Select [Security] - [Power Switch Inhibit] - [Enabled].
To enable
Select [Security] - [Power Switch Inhibit] - [Disabled].
To set this item, the Supervisor and User passwords must have been set.
IMPORTANT:
forced shutdown is still available.
Even if [Power Switch Inhibit] is set to [Enabled], the
Configuring Your EcoPowerGateway 4-5