Managing Ets - Quanta Computer T5016-LB8D Use Manual

Layer 2/3/4 managed switch
Table of Contents

Advertisement

UANTA COMPUTER INC.

11.10.4 Managing ETS

11.10.4.1 Configuring Enhanced Transmission Selection (ETS) interface
Selection Criteria
Interface- Choose a ETS configurable interfaces for setting.
Configurable Data
Admin Mode - Enable/Disable Enhanced Transmission Selection function.
Enable - Enable ETS, start the ETS process and enable other configuration options.
Disable - Disable ETS and stop the ETS process. Other configuration will not be change if
you disable ETS.
The system's default ETS admin mode is disabled
Scheduler Type - Configures the scheduler type for an interface.
WERR - Set scheduler type to WERR.
WRR - Set the scheduler type to WRR.
When the ETS is enabled, the default scheduler type is WERR.
ETS PG-Mapping - This command configures the mapping list of priority to priority groups. Choose
the CNM generation behavior when congestion notification threshold is reached but the incoming
sampled packet does not have CN-TAG.
LAN - assign specific priority id to LAN priority group.
SAN - assign specific priority id to SAN priority group.
IPC - assign specific priority id to IPC priority group.
When the ETS is enabled, priority id 0 to 2 are assigned to LAN, priority 3 to 6 are assigned to SAN,
and priority 7 is assigned to IPC.
ETS LAN Weight - Set ETS LAN Weight. The system's default ETS LAN Weight is 50. The valid
ETS LAN Weight range is 1 to 99, and ETS LAN Weight plus ETS SAN Weight must equal to 100.
_____________________________________________________________________________
LB9 User's Guide
Layer 2/3/4 Managed Switch
1512/1523

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

T3040-ly3T3048-ly2T1048-lb9T1048-lb9a

Table of Contents