Ricoh OR-C1 Field Service Manual page 563

5811 Machine Serial DFU
Display
2
Displays the machine serial number.
BICU
4
Inputs the serial number.
5812* Service Tel. No. Setting
1 Service
2 Facsimile
3 Supply
4 Operation
5816* Remote Service
I/F Setting
Selects the remote service setting.
[0 to 2 / 2 / - /step]
1*
0: Remote service off
1: DFU
2: @Remote service on
CE Call
Performs the CE Call at the start or end of the service.
[0 or 1 / 1 / 1 /step]
2*
0: Start of the service
1: End of the service
NOTE: This SP is activated only when SP 5816-001 is set to "1".
Inputs the telephone number of the CE (displayed when a service
call condition occurs.)
Use this to input the fax number of the CE printed on the Counter
Report (UP mode). Not Used
Displayed on the initial SP screen.
Allows the service center contact telephone number to be displayed
on the initial screen.
System SP Tables-5
4
205